LBSA Battery

Locally assembled lithium ion Phosphate low voltage battery suitable for residential and small commercial installations. Batteries can be paralleled up to 16 units over 80KW of storage.

CAN communication is compatible with SA’s most popular inverters Deye Inverter, Sunsynk Inverter, Victron, Luxpower Inverter and Growatt, voltage or manual settings can be used on Axpert inverters – Mecer, Kodak and others

100A maximum continuous discharge (recommended 50A)

LBSA 5.3 Wall mount Lithium Phosphate lifePO4

Suitable for solar self-consumption and grid backup solutions.

Supplied with wall mount bracket. (Can be free standing directly on the floor feet supplied separately)

Max continuous load 5.3KW

Battery Details

CAN Bus Comms: Victron, Growatt, Sunsynk, DEYE
Bulk + Absorption: 56.2v 
Float : 56.2v
Low Voltage Cut Off: 44v
Maximum continuous Charge/Discharge For Single Unit: 100A  (Recommended 50A)
Charge for Parallel units: (100A*”Units In parallel”) / 2
Discharge for Parallel units: 100A * “Units in parallel

Specifications

– Nominal Voltage: 51.2V
– Nominal Capacity: 105Ah(>105Ah)
– Nominal Power: 5.2KWh @ 0.4c (Tested)
– Dimensions: 408 x 362 x 191 mm
– Weight: 49 kg
– Discharge Cut-off Voltage: 44V
– Charge Voltage: 56V
– Max Charge/Discharge Current (A): 100A
– Communication Interface: CAN, RS485
– Configuration: 16S1P
– Working Temperature: 0~50°C(Charge), -20~50°C(Discharge), -20~55°C(Storage)
– Cell Chemistry: Lithium iron phosphate (LiFePO4)
– Cycle Life: ≥80% capacity state after 4800 cycles at 0.5C, 25°C, 100% DOD
– IP Level: IP 20

LBSA-5.3